PKS KISS System Micro Leash
PKS KISS System Micro Leash
In Stock: 141

Details 
There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.
Your Price: : $26.95
 
Ozone Handle Pass Leash V2
1 of 2
Ozone Handle Pass Leash V2
In Stock: 5

Details 
The Ozone Handle Pass Leash V2 makes passing over your head and around your back even easier with the leash length around four feet. Enhanced with a snap shackle for easy hooking in and out. Ozone quality with super strong webbing and bungee covered with extra soft neoprene. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
Your Price: : $60.00
 
Ozone Short Leash V2
1 of 2
Ozone Short Leash V2
In Stock: 2

Details 
The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.
Your Price: : $49.95
 
Dakine Shorty Leash
Dakine Shorty Leash
In Stock: 27

Details 
Dakine releases the new Kite Leash Shorty. Kiteboarding leash with Stainless steel trigger snap and padded cover. It has a 1/4" (6.5MM) highest quality urethane Dura-Cord for maximum strength, a Molded Opti-Flex Leash ends for maximum durability and an industry standard Push away disconnect attachment.
Your Price: : $40.00
 
PKS EZ Leash Connect
1 of 5
PKS EZ Leash Connect
In Stock: 60

Details 
The PKS EZ Leash Connect is a simple way to add a connection point to any harness for kitesurfing or windsurfing. Just larkshead the webbing onto a strong convenient place, and you've got the perfect place to clip your safety leash.
Your Price: : $10.00
 
Ocean Rodeo Go Joe
1 of 2
Ocean Rodeo Go Joe
In Stock: 41

Details 
The unique hour glass design of the inflatable tube structure places the self righting buoyancy at a high pivot point. This distribution of flotation will power roll your board right side up if it lands foot straps down in the water, (foot straps down create drag, slowing the boards drift).
Your Price: : $98.00
 
Ocean Rodeo Go Joe Bladder
Ocean Rodeo Go Joe Bladder
In Stock: 0

Details 
This REPLACEMENT BLADDER is Custom-made to be the right size for GoJoes, offering a replacement for your GoJoe if the bladder gets damaged.    
Your Price: : $35.00
 
PKS Pro Flow V3 Kite Pump 20"
1 of 3
PKS Pro Flow V3 Kite Pump 20"
In Stock: 297

Details 
The PKS Pro Flow V3 kite pump is the next ingredient for your successful kite session. Our tweaked version of the newest and best pump on the market is constructed with high quality components and measures 20" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.3 liters of air per pump. Internal friction has been virtually eliminated so this pump ensures effortless inflation time after time.With high grade shaft and piston seals, the v3 PKS Pro Flow Pump wi...
Your Price: : $54.95
 
PKS Pro Flow V3 MEGA Kite Pump 24"
1 of 3
PKS Pro Flow V3 MEGA Kite Pump 24"
In Stock: 836

Details 
The latest and greatest PKS Pro Flow V2 MEGA kite pump is the next ingredient for your successful kite session. Our tweaked and upgraded version of the newest and best pump on the market is constructed with high quality components and measures 24" from top to bottom, taller than the older 15" and 18" pumps, for up to 2.9 liters of air per pump. The taller pump is great for taller people or getting more air per stroke than other pumps. Internal friction has been virtually elimin...
Your Price: : $59.95
 
PKS Pro Flow and H1 / H3 Pump Replacement Seal Kit
PKS Pro Flow and H1 / H3 Pump Replacement Seal Kit
In Stock: 1

Details 
Replacement Shaft and Piston seals for PKS Pro Flow pumps or any HP1 / HP3 pump. Use these replacement seals to make your pump act like it is brand new again.
Your Price: : $15.95
 
Ozone Kiteboarding 24" Kite Pump v3 with PSI meter
1 of 3
Ozone Kiteboarding 24" Kite Pump v3 with PSI meter
In Stock: 9

Details 
Ozone Kite and Wing Pump V3 Effortless Inflation The high quality Pump V3 delivers effortless double-action inflation and features a switch so you can manually change to single-action and achieve higher pressures. Now in the Tall/Mega 24" Tall Size delivering 3.7L per stroke! Ergonomic hand grips and solid foot base offer stability, while internally the high quality components and long life lubricant ensure stress-free inflation session after session. The calibrated ...
Your Price: : $69.95
 
Ozone Kiteboarding 20" Kite Pump with PSI meter
1 of 2
Ozone Kiteboarding 20" Kite Pump with PSI meter
In Stock: 27

Details 
Pump your kite with Ozone style with Ozone's kite pump. The pump comes with a PSI meter integrated into the handle for measuring your pressure and also stops you from losing the gauge. Standard and Big Boston inflate adaptors are compatible with most inflate valve types.Includes heavy duty hose for long life of use.
Your Price: : $62.00
 
PKS HD Premium Pump Hose for Kite/SUP Pumps
1 of 2
PKS HD Premium Pump Hose for Kite/SUP Pumps
In Stock: 348

Details 
With only a few exceptions, the PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches to included pump adapters/nozzles.
Your Price: : $19.95
 
Slingshot Kim K 24" Kite Pump with PSI meter
1 of 4
Slingshot Kim K 24" Kite Pump with PSI meter
In Stock: 10

Details 
Slingshot Kiteboarding Kite Pump with pressure gauge, integrated sand filter, premium high-flow and extra-durable hose, and the two extra kite nozzles to fit most most kites on the market. Dual action makes pumping a breeze.
Your Price: : $65.99
 
Bravo 20-2 Kite / Electric SUP / Inflatable Pump
1 of 2
Bravo 20-2 Kite / Electric SUP / Inflatable Pump
In Stock: 12

Details 
The Bravo 20 Electric Pump has everything you need to pump your kiteboarding kite, stand up paddle board (SUP), raft, boat, kayak, or other inflatable items all in one convenient package.
Your Price: : $325.00
 
CrazyFly Kite Pump
1 of 3
CrazyFly Kite Pump
In Stock: 7

Details 
CrazyFly really outdid themselves with this year's kite pump. It boasts many new features, most note worthy being the addition of a valve which controls pressure and capacity. When closed, the pump moves air on both the up and down stroke for high capacity and when the cap is open is only moves air on the down stroke for high pressure pumping.
Your Price: : $59.95
 
PKS - Complete Pump Rebuild Kit - Hose, Seal kit, and Standard Adapters
PKS - Complete Pump Rebuild Kit - Hose, Seal kit, and Standard Adapters
In Stock: 43

Details 
Make your Pump New again with the PKS Complete Pump Rebuild kit. Includes: New Pump Hose Pump Seal Kit Standard Adapters Pump Hose: PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches to pump adapters/nozzles.  
Your Price: : $31.95
 
GRi HP2 / SUP Pump Replacement Seal Kit
GRi HP2 / SUP Pump Replacement Seal Kit
In Stock: 7

Details 
HP2 SUP Pump Replacement Seal Kit Replacement Shaft and Piston seals for PKS Pro Flow pumps or any GRi HP2 pump. Includes Piston and Shaft Seals Use these replacement seals to make your pump act like it is brand new again.
Your Price: : $15.95
 
PKS Replacement Bayonet Hose Fitting
1 of 2
PKS Replacement Bayonet Hose Fitting
In Stock: 103

Details 
Bayonet Hose Fitting This is replacement Bayonet fitting that is on the outlet side of the Hose where you connect an adapter or directly to kites. The fitting is a compression fitting that needs to be glued in place with something like Aquaseal or Seam grip to ensure it stays in place and maintains an air tight connection.
Your Price: : $4.95
 
PKS Replacement SUP Hose Fitting
1 of 2
PKS Replacement SUP Hose Fitting
In Stock: 93

Details 
Replacement SUP Hose Fitting This is replacement SUP fitting that is on the outlet side of the Hose where you connect an adapter or directly to SUP's or Kites with the V2 SUP Style Valve. The fitting is a compression fitting that needs to be glued in place with something like Aquaseal or Seam grip to ensure it stays in place and maintains an air tight connection.
Your Price: : $4.95
 
PKS Universal Pump Adapter Set
1 of 7
PKS Universal Pump Adapter Set
In Stock: 91

Details 
Replacement Silicone Rings for Pump Adapters
Your Price: : $29.95
 
PKS Pump Adapter Silicone Ring
PKS Pump Adapter Silicone Ring
In Stock: 330

Details 
Replacement Silicone Rings for Pump Adapters
Your Price: : $2.00
 
PKS H3 Adjustable SUP Style Flysurfer/Naish Pump Adapter
1 of 2
PKS H3 Adjustable SUP Style Flysurfer/Naish Pump Adapter
In Stock: 4

Details 
The Adjustable H3 SUP Pump Adapter is compatible with a variety of stand up paddleboards and flysurfer. There are three colored rings on the adapter that allow it to fit a variety of H3 valve depths. The black ring is rubbery and provides a good pressure/friction fit while the yellow and green rings are made from plastic and can be taken off to custom-set the depth of the valve. Inside the middle of the adapter there is also a screw that has an adjustable height.
Your Price: : $10.00
 
PKS S3 Pump Adapter for Duotone and North Airport Valves with Silicone Ring
1 of 2
PKS S3 Pump Adapter for Duotone and North Airport Valves with Silicone Ring
In Stock: 584

Details 
The PKS North/Duotone Airport  Pump Adapter/Nozzle with double silicone sealing ring is compatible with 2013 and newer North kites, and 2014 and newer Cabrinha kites with the Airlock 2 screw valve. This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.)  The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters.  The adapter can be used as is or may need to be modified by fili...
Your Price: : $8.50
 
PKS A2 Pump Adapter for North, Core, Eleveight, RRD and Cabrinha Airlock 2 Valve Pump Adapter
PKS A2 Pump Adapter for North, Core, Eleveight, RRD and Cabrinha Airlock 2 Valve Pump Adapter
In Stock: 923

Details 
The North and Core Pump Adapter/Nozzle is compatible with Core kites, 2013 and newer North kites and Duotone kites.
Your Price: : $6.00
 
PKS M2 Max Flow Pump Adapter for Liquid Force Valves/ Reedin
PKS M2 Max Flow Pump Adapter for Liquid Force Valves/ Reedin
In Stock: 304

Details 
The Liquid Force Valve Pump Adapter/Nozzle is compatible with 2011 and newer Liquid Force kites with the Max Flow valve.
Your Price: : $6.00
 
PKS S1 Standard Pump Adapter for 7mm and 9mm Valves
PKS S1 Standard Pump Adapter for 7mm and 9mm Valves
In Stock: 180

Details 
The Standard Pump Adapter for 7mm and 9mm Valves is compatible with almost all kites prior to about 2008 as well as many newer kites. Nearly all kites which have a separate inflate and deflate valves are 9mm or 7mm valves. This is also the adapter used for inflating struts on kites without a one-pump system.
Your Price: : $5.00
 
PKS V2 Universal Kite Valve Pump Adapter for SUP Style Naish/Flysurfer/F-One/Core
1 of 2
PKS V2 Universal Kite Valve Pump Adapter for SUP Style Naish/Flysurfer/F-One/Core
In Stock: 576

Details 
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Caore kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
Your Price: : $8.50
 
PKS BC Pump Adapter for Big Boston Screw Valves
PKS BC Pump Adapter for Big Boston Screw Valves
In Stock: 0

Details 
This big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer,) and Switch kites.
Your Price: : $5.50
 
PKS S2B - SUP to Standard Bayonet Pump Adapter
1 of 6
PKS S2B - SUP to Standard Bayonet Pump Adapter
In Stock: 280

Details 
PKS S2B - SUP to Standard Baynet Pump Adapter Now you can use any pump adapter on your SUP pump with the new S2B adapter. Simply attache the S2B adapter to your SUP hose fitting and you can now use any of the standard Kite or SUP pump adapters on your SUP pump!  
Your Price: : $8.00
 
PKS BT Threaded Big Boston Screw Valve Pump Adapter
1 of 2
PKS BT Threaded Big Boston Screw Valve Pump Adapter
In Stock: 28

Details 
This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.
Your Price: : $8.50
 
Bravo 20 Electric Pump Battery
Bravo 20 Electric Pump Battery
In Stock: 1

Details 
This Bravo 20 Electric Pump battery will replace the battery in a Bravo 20 or Bravo 20-1 pump. It's a 12 volt, 7 amp lead acid battery.
Your Price: : $28.00
 
Bravo 20-2 Main and Control PCB
Bravo 20-2 Main and Control PCB
In Stock: 8

Details 
This is a replacement Main and Control PCB, with cables.  part SP Z052 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump
Your Price: : $56.00
 
Bravo 20-2 Top Case
Bravo 20-2 Top Case
In Stock: 6

Details 
This is a replacement Top Case / Cover with Gauge and Control PCB installed.  part SP Z144 for the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
Your Price: : $28.00
 
PKS Replacement Hose for Bravo 20 series Pumps
1 of 2
PKS Replacement Hose for Bravo 20 series Pumps
In Stock: 15

Details 
Replacement hose for Bravo 20 series Electric Pumps A Heavy Duty hose specifically designed for use witht he high pressure Bravo 20 series pumps. Includes a double O-Ring seal on the pump side of the hose. Comes with a standard bayonet fitting on the outlet side that accepts adapters for your specific application.  
Your Price: : $29.95
 
Bravo 20-2 Piston Group
Bravo 20-2 Piston Group
In Stock: 1

Details 
This is a replacement Piston Group / Compressor Unit part SP Z146 go the Scoprega GE20-2 / Bravo 20-2 Electric Inflator Pump.
Your Price: : $72.00
 
Ozone Hook Knife
Ozone Hook Knife
In Stock: 18

Details 
Ozone Hook Knife with Stainless Steel Blade, PU covered Pull Loop. Better to have it and never need it than to need it and not have it!
Your Price: : $15.00
 
Dakine Hook Knife with Pouch
Dakine Hook Knife with Pouch
In Stock: 14

Details 
Dakine's kiteboarding specific hook knife has 2 anonized-aluminum opposing blades for easy and instant cutting, and comes with easy-mounting sheath. w/sewn-in loop to mount to your harness, etc.    
Your Price: : $12.00
 
CrazyFly Twintip Screw Set
1 of 2
CrazyFly Twintip Screw Set
In Stock: 38

Details 
Complete set of stainless steel screws for 2007-2018 Crazyfly twintips: 4 screws for pads/straps. 2 screws for handle. 8 screws for fins.
Your Price: : $15.00
 
AK Hook Knife with Pouch
1 of 3
AK Hook Knife with Pouch
In Stock: 58

Details 
AK - KITE SAFETY KNIFE & POUCH Convenient pouch for simple harness attachment. Instant kite line cutting capability. Compatible with all AK spreader bars. The AK Kite Knife & Safety Pouch can be placed anywhere on your harness by attaching it through the attachment loop. The AK Kite Safety Knife can also be placed into the built-in pouch of the AK spreader bars. For emergencies, the AK Kite Safety Knife will instantly cut through kite lines in case you ever get tangled...
Your Price: : $15.00
 
Dakine Torque Driver
Dakine Torque Driver
In Stock: 12

Details 
Designed to give you the freedom to tighten up wherever you are, this is a tool that transcends a nice-to-have and lands squarely in the necessity bin. All parts fit inside tool for compact storage in a pocket or pack.
Your Price: : $15.00
 
CrazyFly - Carbon Fin Screws - Set of Two
CrazyFly - Carbon Fin Screws - Set of Two
In Stock: 2

Details 
Replacement screws for Crazyfly Carbon Fins M5 x 16mm
Your Price: : $1.00
 
2018 Crazyfly Foil Screws and Washers (set of 4)
2018 Crazyfly Foil Screws and Washers (set of 4)
In Stock: 7

Details 
Crazyfly Foil screws and washers for attaching a foil to the Crazyfly foil decks. Great replacements if you ever lose a screw on the water or during travel.
Your Price: : $14.50
 
Crazyfly Hexa Binding Screws and Washers (set of 4 Blue)
Crazyfly Hexa Binding Screws and Washers (set of 4 Blue)
In Stock: 32

Details 
Crazyfly  Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.
Your Price: : $18.00
 
Crazyfly LTD Hexa Binding Screws and Washers (set of 4 black)
Crazyfly LTD Hexa Binding Screws and Washers (set of 4 black)
In Stock: 20

Details 
Crazyfly LTD Hexa Binding screws and washers. Great replacements if you ever lose a screw on the water or during travel.
Your Price: : $18.00
 
PKS - Stainless Steel M6 Studs - Sold Individualy
PKS - Stainless Steel M6 Studs - Sold Individualy

Details 
PKS Stainless Steel M6 Studs Perfect for mounting a Hydrofoil to a board with M6 Inserts.   Sizes: M6 x 20mm M6 x 25mm M6 x 30mm M6 x 35mm  
Your Price: : $1.50
 
Tef-Gel Corrosion Eliminator and Anti-Seize Lubricant - 20cc
Tef-Gel Corrosion Eliminator and Anti-Seize Lubricant - 20cc
In Stock: 35

Details 
Your Price: : $42.95
 
PKS - M6 Stainless Steel Socket Head Screws
PKS - M6 Stainless Steel Socket Head Screws

Details 
M6 Hydrofoil Mounting Screws These are M6 Stainless Steel screws for any hydrofoil that uses the M6 T-nut, which just about all Tracked hydrofoils.  These are Hex Head(socket cap), counter sink screws
Your Price: : $2.25
 
PKS - M8 Brass Track Nuts
PKS - M8 Brass Track Nuts
In Stock: 142

Details 
M8 Brass Hydrofoil Track T-Nuts - Sold Individualy These are Replacement M8 Brass T-nuts. These are hard to get replacements that we now have in stock.  They are sold individualy so you can buy only what you need.
Your Price: : $4.00
 
PKS - M8 Stainless Steel Socket Head Screws
PKS - M8 Stainless Steel Socket Head Screws

Details 
M8 Hydrofoil Mounting Screws These are M8 Stainless Steel screws for any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are Hex Head(socket cap), counter sink screws
Your Price: : $2.25
 
PKS - M6 Studs with Flanged Nuts for Hydrofoil Mounting - Set of 4
PKS - M6 Studs with Flanged Nuts for Hydrofoil Mounting - Set of 4
In Stock: 20

Details 
PKS M6 Studs with M6 Flanged nuts for mounting Hydrofoil on deck with inserts. Includes a set of 4 M6 Studs and Flanged Nuts
Your Price: : $12.00
 
Foilmount Wizardhat Hardware - Universal Foil Mounting Hardware Set
1 of 2
Foilmount Wizardhat Hardware - Universal Foil Mounting Hardware Set
In Stock: 0

Details 
Wizardhat Hardware Set This is the Wizardhat hardware only set.  If you just need some extra hardware This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or different sized bolts the Wizardhat will work on any.  Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate. The Wizardhat hardware only se...
Your Price: : $36.00
 
Foilmount Wizardhat - Cone Nuts Only - Sold Individually
Foilmount Wizardhat - Cone Nuts Only - Sold Individually
In Stock: 28

Details 
Wizardhat Cone Nut This is the Wizardhat Cone Nuts only.  If you just need some extra hardware. SOLD INDIVIDUALY
Your Price: : $4.50
 
PKS - M6 Stainless Steel Low Profile Track Nuts
PKS - M6 Stainless Steel Low Profile Track Nuts
In Stock: 82

Details 
M6 Hydrofoil Track Stainless Steel T-Nuts These are Replacement M6 Stainless Steel T-nuts for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold individually,  so if you need a set of 4 make sure to buy 4 of them.  Watch the video below for our testing of the M8 version against the brass version. Here are the total dimensions of this part: Track width: 8.5m...
Your Price: : $4.00
 
PKS - M8 Stainless Steel Low Profile Track Nuts
PKS - M8 Stainless Steel Low Profile Track Nuts
In Stock: 42

Details 
M8 Hydrofoil Track Stainless Steel T-Nuts These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are low profile meaning they are thinner than stock brass T-nuts by about 2.2mm from top to bottom but STRONGER. Sold individually
Your Price: : $4.00
 
PKS - M6 Stainless Steel Track Nuts and M6 x 25mm Mounting Screws
PKS - M6 Stainless Steel Track Nuts and M6 x 25mm Mounting Screws
In Stock: 77

Details 
M6 Hydrofoil Track Stainless Steel T-Nuts and M6 x 25mm Mounting Screws - Set These are Replacement M6 Stainless Steel T-nuts and M6 x 25mm Mounting Screws for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.
Your Price: : $20.00
 
PKS - M8 Stainless Steel Track Nuts and M8 x 25mm Mounting Screws
PKS - M8 Stainless Steel Track Nuts and M8 x 25mm Mounting Screws
In Stock: 77

Details 
M8 Hydrofoil Track Stainless Steel T-Nuts and M8 x 25mm Mounting Screws - Set These are Replacement M8 Stainless Steel T-nuts and M8 x 25mm Mounting Screws for the any hydrofoil that uses the M8 T-nut including Slingshot, North and others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.
Your Price: : $22.00
 
PKS - M8 Brass Track Nuts and Stainless Steel M8 x 25mm Mounting Screws
PKS - M8 Brass Track Nuts and Stainless Steel M8 x 25mm Mounting Screws
In Stock: 53

Details 
M8 Brass Hydrofoil Track T-Nuts and Stainless Steel M8 x 25mm Mounting Screws - Set These are Replacement M8 Brass T-nuts and Stainless Steel M8 x 25mm Mounting Screws for the any hydrofoil that uses the M8 T-nut including Slingshot, North and others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.
Your Price: : $20.00
 
PKS Smart Wing Leash System
1 of 4
PKS Smart Wing Leash System

Details 
PKS Smart Wing Least System The PKS Smart Wing Leash System includes the PKS Smart Cuff, a wrist cuff with multiple "locking" features to ensure the leash is not inadvertantly pulled off your wrist. The Elite Universal leah line with locking Larks Head Loops and the PKS Quick Connect Pigtail for quick and easy connections to any win  
Your Price: : $66.95
 
PKS Elite Universal Wing Leash Line w/Quick Connect Pigtail
1 of 4
PKS Elite Universal Wing Leash Line w/Quick Connect Pigtail

Details 
PKS - Elite Universal Wing Leash The PKS Wing Leash is made using heavy duty 3/16" Spectra hollow core line with high elasticity bungee line inside.  The ends have 7/64th spectra line that has been wrapped and sewn in place creating a locking larks head for the ultimate strength, security, and versatility. By using the 7/64" spectra line for the loops, you are able to easily connect to multiple wing or harness connection types sush as hand shake,  larks head,  or...
Your Price: : $39.95
 
PKS - Howard Signature Wing Leash Line
1 of 6
PKS - Howard Signature Wing Leash Line

Details 
The Howard Signature Wing Leash After Building, refining, changing, and modifying his personal leash for over a year and spending countless hours searching for and sourcing materials that are Made in the USA,  Jeff has finally finished the all new Howard Signature Wing Leash.  Featuring a 100% Dyneema Line with a Shock Cord core, an integrated Stainless Steel ball bearing swivel, and the all new Slide Lock Quick Connect System, the Howard Signature Wing leash is the most adaptable...
Your Price: : $54.95
 
PKS Smart Wrist Cuff
1 of 4
PKS Smart Wrist Cuff
In Stock: 33

Details 
PKS Smart Cuff Wrist Leash Cuff: The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is a low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is an over lock velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened.
Your Price: : $29.95
 
PKS Wing Leash Swivel
1 of 9
PKS Wing Leash Swivel
In Stock: 190

Details 
PKS Wing Leash Swivel The PKS Wing Leash Swivel is perfect for wrist or waist leashes. A high strength heavy duty Wing Leash swivel. It is an anti coiling mechanism that helps to prevent twists and tangles in your leash line caused by constant wing positioning and manuevering. Feel free to do as many handle pass tacks with this accessory and know that the Stainless Steel Ball Bearing Swivel will help keep your leash line free of tangles. Key Features: Swivel body made of C...
Your Price: : $10.95
 

« | 1 | 2 | 3 | 4 | 5 | 6 | Next »